All,
Firstly we are happy to be onboard BimmerBoost. It has been quite a while and for the new year we made numerous "resolutions" and one of them was to finally join this forum.
In direct relation to that another resolution was to give us our voice into constant nonsense, product attacks, and deception we have seen in only one of our competitors.
Being that we deal in hardware it is a great thing to address these items because as they say a picture is worth a thousand words, and we have nothing to hide.
We'd agree that this thread such as this SHOULD not necessary, but it is when you realize the type of person on the other side and the amount of efforts it cost in dealing with the misinformation in the hands of hundreds to thousands of "faithful" enthusiasts. And with that it has to stop, and we will continue to squash it wherever we see it. This concept was in fact one of our other resolutions for the new year.
So without further ado, here are the quotes that were made by said competitor and pictures of their product exposed. Keep in mind this is the same valve and part number for part number of that we have been using since 2012. The direct copy of the part combined with an of all things "up charge", is lesser importance to us than that of what lies behind the principal of these below quoted statements.
For those who may question us as using this valve, we openly invite any random customer out there to dissect your RB PCV valve to confirm and we will send you another free one (limited). We will do this as we have again nothing to hide, and it is worth it to prove any point on the matter.
We will further add that there maybe more of this to go around. Consider it an advanced warning. We have had it over the years and it is time to clean up the streets.
Thanks,
Rob
Firstly we are happy to be onboard BimmerBoost. It has been quite a while and for the new year we made numerous "resolutions" and one of them was to finally join this forum.
In direct relation to that another resolution was to give us our voice into constant nonsense, product attacks, and deception we have seen in only one of our competitors.
Being that we deal in hardware it is a great thing to address these items because as they say a picture is worth a thousand words, and we have nothing to hide.
We'd agree that this thread such as this SHOULD not necessary, but it is when you realize the type of person on the other side and the amount of efforts it cost in dealing with the misinformation in the hands of hundreds to thousands of "faithful" enthusiasts. And with that it has to stop, and we will continue to squash it wherever we see it. This concept was in fact one of our other resolutions for the new year.
So without further ado, here are the quotes that were made by said competitor and pictures of their product exposed. Keep in mind this is the same valve and part number for part number of that we have been using since 2012. The direct copy of the part combined with an of all things "up charge", is lesser importance to us than that of what lies behind the principal of these below quoted statements.
For those who may question us as using this valve, we openly invite any random customer out there to dissect your RB PCV valve to confirm and we will send you another free one (limited). We will do this as we have again nothing to hide, and it is worth it to prove any point on the matter.
Quote:
Originally Posted by Tony@VargasTurboTech
![Click here to enlarge]()
We use a different manufacture of the actual PCV valve that is at the heart of the assembly, we feel ours are a higher quality unit, made by a respected OEM manufacture, but they both do the same thing.
Quote:
Originally Posted by Tony@VargasTurboTech
![Click here to enlarge]()
In our opinion the RB valve uses a slightly lesser quality Valve, but still held up to our boost test. We ordered and tried numerous PCV's. some leaked and some didn't. These were the highest quality valves we found that had zero boost leak.
Quote:
Originally Posted by Tony@VargasTurboTech
![Click here to enlarge]()
Hey Rob, by nonsense you mean coming into our thread so you can start more petty drama over a PCV valve as you just did? The valves you use in OUR opinion are of a lower quality than the ones we sourced. This is our opinion, if you have a differing opinion that is just that your opinion.
It would be appreciated if you could clean up your act and stop the misinformation in 2015! We wish you the best, Thanks!
It would be appreciated if you could clean up your act and stop the misinformation in 2015! We wish you the best, Thanks!
Quote:
Originally Posted by Tony@VargasTurboTech
![Click here to enlarge]()
As I stated in the post the RB valves worked just fine, and passed the boost test without issue, we felt the valves we sourced were slightly higher quality. Not sure why he felt the need to come in here to stir up drama, while at the same telling us to clean up our act, and not stir up drama....
Thanks,
Rob