Upgraded Transmission mount DIY

Note: Not responsible for any damage to you or your car, this worked on my car so will work on yours.

***This tutorial assumes you know how to get your car secured on jack stands, if in doubt do NOT attempt this DIY!

You can get Rogue Engineering transmission mounts here:

http://hpashop.com/Rogue-Engineering...s-e9x-nonM.htm

Tools Need not in pic (2 jacks if possible & block of wood, (1) for a safety catch in case jack stand fail (I saw this happen and will NEVER forget it)....safety 1st).

Torque specs:

transmission mounts: 21Ft Lbs
Transmission brace bolts: 25ft lbs

Suggestions/notes:

This assumes you know how to take off plastic panels and you may have to take off (1) aluminium tray, My car was completely dismanteled (exhaust,differential,driveshaft for subframe bushing, lock-down differential kit, wavtrac install) but it does not appear you need to take off driveshaft to do this.

Exhaust removal: (You Do not need to take your exhaust off to do this, simply disconect exhaust at dps, take off brace and (2) 19MM nut hangers and exhaust should drop down far enough.

Click here to enlarge