Clik here to view.
VTT Stage 2 with Silicone intakes Preliminary results 576WHP/615WTQ
Put the car on the dyno tonight, for a few runs with the new intakes on. The results were pretty much as expected, we can most likely get more power out of the car, but 640WHP on stage 2's (or RB's),...
View ArticleClik here to view.
VTT N54 intake and Shotgun production update
Second round of fitment samples came back today. Changes to the front intake were perfect, they are both approved for production, and will be done in the next few weeks. We also got our second sample...
View ArticleVANOS issue after valve cleaning Engine Malfunction
Car is a 2008 535i with just under 80k miles. Over the last week, the following was performed/installed: Valve cover gasket replacement Oil housing gasket replacement Coolant replaced Top radiator hose...
View ArticleClik here to view.
VTT 2+/Brentuning/Fuel-it! results
The car: 2007 E90, full weight with a 15" subwoofer in the trunk. 105k miles! 6MT, Spec SMFW, BMW 550i clutch BMS DCI CP-e charge pipe with Tial BOV VRSF 7" FMIC 1 step colder plugs Riss Racing...
View ArticleClik here to view.
First VTT Intakes, Charge pipe, and SIngle Barrel installed
Since our production samples were a perfect fit, we decided to install them on a friends car, along with a set of Billet Stage 2's, the first Production Single Barrel kit, put some miles on them, and...
View ArticleClik here to view.
Independent Stage 2+ results preliminary tune
Our customer @jzeee037 got his car on the dyno today. This is a zero revision tune, I had Dzenno take one of my older Stage 2+ flashes and back it way down as a good starting point. He flashed it in,...
View Articlen54 Single turbo engine codes
Hi all... I've been working on my engine and build it for the past 2 years. and the time has come to put a single 6466 turbo. built bottom end with CP pistons, arrow rods, ported/polished VAC cylinder...
View ArticleFBO 1M stage 1 VTT dyno
In a few hours will be the first dyno since going FBO with VTT stage 1. Last time it was put on the dyno the HPFP was on its last legs and produced 390bhp. Hopefully will be seeing 400+. Will be done...
View ArticlePTF Twin Disc Clutch withAluminium SMFW. Should I do it?
Hey there, I just wanted to get some other people's opinions on getting an aluminum flywheel with the PTF/SPEC twin disc clutch. I don't daily drive the car much anymore so it's mostly used for a...
View ArticleClik here to view.
BMS (Burger Tuning) BMW N54 port injection fuel system kit
Surprised we haven't seen more talk about this: Quote: Originally Posted by Terry @ BMS Hey guys, Making this thread for updates and details on our N54 Port Injection Fuel Kit. We're currently testing...
View ArticleTune Up Specials At FFTEC!!!
DonÂ’t miss out on January specials at FFTEC!!! Save some money and tune up your Bimmer! If there is an item you desire which is NOT listed here, please call, PM, or email mike@fftec.com for a price...
View ArticleClik here to view.
VTT Stage 2 with Silicone intakes Preliminary results 576WHP/615WTQ
Put the car on the dyno tonight, for a few runs with the new intakes on. The results were pretty much as expected, we can most likely get more power out of the car, but 640WHP on stage 2's (or RB's),...
View ArticleClik here to view.
VTT Silicone charge pipe nears completion
As everyone knows, our new silicone intakes, are in production a few short weeks away, and have already shown great gains. We also made a charge pipe at the same time (which was also test fit with the...
View Articleaem wmi question
Guyz...dumb question...lets say i set my aem wmi controller to start flowing at 8psi and max flow at 15psi.....in the midrange at 18.5 psi...the meth is getting sprayed right? Or does it stop spraying...
View ArticlePricing announcement VTT Silicone intakes and Charge pipes!
We are proud to announce the pricing for our much anticipated Silicone intake pipes, and Charge pipe for the N54! Prices will be as follows. Silicone intake pipes: MSRP $499 (When purchased with turbo...
View ArticleCan I flash any IJEOS bin to go back to stock?
As the tittle states, I am trying to flash my car back to stock using the bimmerboost app and I want to know if it matters what IJEOS file I use. From the download section i see that there are: -...
View ArticleClik here to view.
VTT Silicone charge pipe nears completion
As everyone knows, our new silicone intakes, are in production a few short weeks away, and have already shown great gains. We also made a charge pipe at the same time (which was also test fit with the...
View Articleaem wmi question
Guyz...dumb question...lets say i set my aem wmi controller to start flowing at 8psi and max flow at 15psi.....in the midrange at 18.5 psi...the meth is getting sprayed right? Or does it stop spraying...
View ArticlePricing announcement VTT Silicone intakes and Charge pipes!
We are proud to announce the pricing for our much anticipated Silicone intake pipes, and Charge pipe for the N54! Prices will be as follows. Silicone intake pipes: MSRP $499 (When purchased with turbo...
View ArticleCan I flash any IJEOS bin to go back to stock?
As the tittle states, I am trying to flash my car back to stock using the bimmerboost app and I want to know if it matters what IJEOS file I use. From the download section i see that there are: -...
View Article